| |
Description
1. This product adopts super bright chip as light source and super flexible PCB board as base
2. Large viewing angle(120°), long life,high intensityand stability.
3. The min cutting unit is 3 LEDs and you can cut at random according to the pratical requirement.
4. Its backside have the Double-glue which can ripe then stick the paste on the board.
5. Standard Lenght/roll:5M
6. LED Qty : 5 meters/roll; 60 pcs/meter
7. The width:5mm(non-waterproof)
8. Working Voltage:12V DC
9. Waterproof: IP68 / None
10. 335 Side Emitting SMD LED
11. 1000~1300 ( warm white); 1500~1800MCD/LED (white)
12. 12W/5meter
Specifications:
335 Side Emitting LED Light Strip |
Item No. |
Size
(MM) |
LED Qty |
Non-Waterproof |
Color |
MCD/LED |
Color Tep |
Input(v) |
Power
(W/M) |
HQ-FS335-60W |
5*1000MM |
60 |
NO |
White |
1500~1800 |
6000-6500k |
DC12 |
2.4W |
HQ-FS335-60WW |
5*1000MM |
60 |
NO |
Warm white |
1000~1300 |
3000~3500k |
DC12 |
2.4W |
HQ-FS335-60B |
5*1000MM |
60 |
NO |
Blue |
800 |
460nm-475 |
DC12 |
2.4W |
HQ-FS335-60G |
5*1000MM |
60 |
NO |
Green |
1000 |
515-530nm |
DC12 |
2.4W |
HQ-FS335-60Y |
5*1000MM |
60 |
NO |
Yellow |
800 |
585-595nm |
DC12 |
2.4W |
HQ-FS335-60R |
5*1000MM |
60 |
NO |
Red |
800 |
615-630nm |
DC12 |
2.4W |
Item No. |
Size
(MM) |
LED Qty |
Waterproof |
Color |
MCD/LED |
Color Tep |
Input(v) |
Power
(W/M) |
HQ-FS335-60W1 |
5*1000MM |
60 |
YES |
White |
1500~1800 |
6000-6500k |
DC12 |
2.4W |
HQ-FS335-60WW1 |
5*1000MM |
60 |
YES |
Warm white |
1000~1300 |
3000~3500k |
DC12 |
2.4W |
HQ-FS335-60B1 |
5*1000MM |
60 |
YES |
Blue |
800 |
460nm-475 |
DC12 |
2.4W |
HQ-FS335-60G1 |
5*1000MM |
60 |
YES |
Green |
1000 |
515-530nm |
DC12 |
2.4W |
HQ-FS335-60Y1 |
5*1000MM |
60 |
YES |
Yellow |
800 |
585-595nm |
DC12 |
2.4W |
HQ-FS335-60R1 |
5*1000MM |
60 |
YES |
Red |
800 |
615-630nm |
DC12 |
2.4W |
Before Purchasing, please Indicate Below:
Voltage: 12VDC, 24VDC is available
PCB Color: White, Brown is Available
PCB Width: 5mm,6mm,8mm,10mm,12mm,15mm is available
LED Color: Red, Blue, Green, Yellow, White, Warm white, Pink is available.
LED Number (LEDs/meter): 30(3528,5050), 60(5050,3528,335), 78(3528), 120(3528),is available.
Color Temperature: If white and Warm white, 2400k, 2700k, 3000k,3500k,5000k,6000k,7000k,8000k,9000k,12000k is available.
Strip Connector: White, Transparent, Black, Cable, Water-proof, Non-waterproof is available.
Accessories: Glue, Clip, male/female connectors, controller, wireless controller, amplifier, dimmer, wireless dimer are available.
Waterproof: Crystal, Silicone(PVC) cased, Neon, Smart are waterproof.
Dropper is semi-waterproof. Ribbon is non-waterproof.
Six types of strips are developed: Ribbon, Crystal, Silicone cased, Dropper,Neon(Side emitting strip), Smart.
Ribbon Series: Regular FLEX LED Strip: SMD LEDs are mounted directly on the surface of the flexible PCB(Printed Circuit Board), With 3M tape on the back,
easy installation for indoor use.
Crystal Series: High IP standard, plastic cover and sealed with silicone & PU, PVC & EPOXY inside. Widely used outdoor and under water.
Silicone cased series: LED Strips encapsulated with a Silicone(or PVC)jacket. It can reach water-proof class IP64. Easy to access solder points to rejoin.
Widely used indoor and outdoor. be used in very low temperature.
Dropper Series: LED strips dropped with a plastic gel to get water resistant coat on the surface, widely used indoor and outdoor.
Neon series: Side emitting strips, very flexible, easily be bent into vertical directions of light. Widely used for making patterns letters and replacing
Neon.
Smart Series: Smart strips, with smart IC on the PCB receiving signal from smart controller, can get more effection such as flow, scan, color change etc.
The smart controller can provide more than 80 modes.
|
|
